Built in flow control allows the columns to completely fill and remain full while simultaneously flowing for a continuous full saturation and rinse process. Each column has a tri-clamp top cap and hinged bottom cap for easy load and unload.

Transducers are assembled and isolated in a fully welded enclosure manufactured by ultrasonic power corporation. Each column has 500 watt transducers mounted vertically down the length of the column. System operates on vacuum only for fluid transfer and consists of two 10lb columns run in series. Used-Ultrasonic Ethanol Extractor, 20lb high purity ultrasonic extraction system previously used in CBD extraction from hemp. (1) SRS Solvent Recovery System with In-Line Decarb. Heats wash solution from -40 degree C to 20 degree C. (1) HFS Heated Filter Skid: Filters at a rate of 40 gpm with a size #2 filter bag. 100 Pound Maximum Dry Weight Basket Capacity. (1) NSEP Centrifuge for Material Drying: Explosion Proof Electric Basket Centrifuge, Model 755. (2X) American made Liquid Solvent Pumps with -90 Mechanical Seals and C1D1 Motors. Includes: (2x) 100L Material Vessels - Liquid Dimple-Jackets and Cryogenic Insulation. 1,700 pounds to 2,000 pounds of Bio-Mass Material in 12 Hours of Processing. 30-50 pounds Load Size Per Material Vessels (2x). (1) AES Alcohol Extraction System: 200 L Capacity. Includes: 200 Gallon Insulated Clean Solvent Storage 90 Gallon Jacketed and Insulated Solution Holding Tank. Includes (1) ICS: Continuous In-Line Solvent Chilling System. Used- Pinnacle Stainless Complete Full Set Up Extraction Bundle. Common applications include nano-emulsification, cell disruption (lysis), degassing, deaeration, homogenization, deagglomeration and dispersing. It is suitable for working with liquid volumes above 500 mL, with no upper limit. Designed for procedure optimization and bench-scale production. Output characteristics: amplitude 93 microns (maximum), frequency 20 (+/- 1) kHz, power 1200 W (maximum). Half-wave Barbell Horn (HBH, 32 mm tip diameter). Output Characteristics: amplitude 24 microns (maximum), frequency 20 (+/- 1) kHz, power 1200 W (maximum). Water-cooled piezoelectric transducer (SWCT-1200). Additional features: continuous resonant frequency lock, automatic power adjustment, fine amplitude adjustment and lock (20 - 100%), monitoring of output power and frequency, optional external control. Output characteristics: 3000 V rms (maximum), 20 (+/- 1) kHz, 1200 W (maximum). Rated current: 20 A maximum, 10 A maximum. Used-Sono Mechanics BSP-1200 Ultrasonic Liquid Processor.

Huber unistat 815 manual